OPTICON OPC-3301i Linear Imager Bluetooth Cordless Scanner

The OPC-3301i is a compact handheld CCD scanner using Bluetooth to communicate with other devices. This wireless device is equipped with an aggressive scan engine providing quick and easy scanning. In order to increase productivity, the OPC-3301i can read low-contrast barcodes, as well as high density (condensed) barcodes. - Low cost Cordless Handheld 1D Imager - Bluetooth ver. 2.1 - Up to 10 m Range - Small form factor - up to 300 Scans/sec - Long operating time on battery charge - Ultra-lightweight, yet solid scanner withstands drops up to 1.5 meter onto concrete - Scan Engine: CCD linear image sensor - Light Source: Red LED 624 nm - Scan Pattern: Single Line - Scan Rate: 300 scans/sec - Motion Tolerance: N/A - Image Capture: N/A - Capture Area: N/A - Contrast Ratio: N/A - Resolution: 0.102 mm / 4 mils (Linear Barcodes) - Depth of field: Code 39: 5 mils - 5.5 to 7.5 cm 6 mils - 4.5 to 10.0 cm 10 mils - 3.5 to 17.5 cm 20 mils - 4.0 to 30.0 cm 30 mils - 6.0 to 50.0 cm Performance may be impacted by Bar code quality and environmental conditions - Tilt Angle: +/- 25° - Pitch Angle: +/- 50° - Skew Angle: +/- 65° - Ambient Light Immunity: Fluorescent 10,000 Lux Max. Direct Sun 100,000 Lux Max. - Symbologies supported: 1D: JAN/UPC/EAN incl. add on, Codabar/NW-7, Code 11, Code 39, Code 93, Code 128, GS1-128 (EAN-128), GS1 Databar (RSS), GS1 DataBar Limited, GS1 DataBar Expanded, Code 11, IATA, Industrial 2of5, Interleaved 2of5, ISBN-ISSM-ISSN, Matrix 2of5, MSI/Plessey, S-Code, Telepen, Tri-Optic,UK/Plessey Postal Code: Chinese Post, Korean Postal Authority code - Programming Method: Scan codes in Manual - Driver available: JavaPOS, OPOS Utilities - Indicators: Multi Colour LED (red/green/blue) Buzzer - Operating Modes: Trigger - Communication Type: Bluetooth cordless - Communication Technology: Bluetooth Ver. 2.1 SPP/HID, output Class 2, Range up to 10 m 1 to 1 Connection to Bluetooth enabled Device Master/Slave mode Authentication & encryption - Interfaces: N/A - Supply Voltage: 6 VDC to Charging Base Battery: Li-ion 1100mAh, Charge time on Charging base 3 Hrs at 6V Operating Time: approx. 48 Hours at 1 Scan/5 Sec, Approx. 72 Hours Stand by - Power Consumption: 15mA Standby, Max.200 mA - Drop Specification: Designed to withstand repeated 1.5m drops to concrete Vibration Test 10-100Hz with 2G for 1 Hour - Environmental Sealing: IP42 - ESD Protection: N/A - Operating Environment: 0° ~ 50°C, Relative Humidity 20 - 85% none condensing - Storage Environment: -20° ~ 60°C, Relative Humidity 20 - 85% none condensing - EMC/Safety Standards: CE, FCC, VCCI, MFi, RoHS, IEC62471, IEC60950-1 - External Dimensions (WxDxH): Scanner: 113 x 56 x 132 mm - Weight: Scanner 127 g Base 144 g